Bromepy, présente ses brosses de métallisation : brosse métallique circulaire, Brosse métallique en tirant, Brosse métallique à monter Blonding brushing - Pilot Bonding Brushes

That little extra for your electrical contacts

Purpose of product :

Enables brushing to be used to eliminate surface treatments, primers and paints in order to make electrical contact points (earth bonding) for fitting earth straps, instruments or other apparatus to a structure.

Implementation :

Used with a handheld electric or pneumatic tool with a rotation speed of 2500 rev/min, fitted with a 4.8 collet or a clamping chuck. Can also be used in a fixed machine.

Description of product : Round metal brush fitted with a centring guide

Push-action metal brush :

one-piece assembly, steel drive spindle and centring guide, polyamide body and copper ferrule, hard brassed or stainless steel, bonded with epoxy resin.
Push-action versions: BAMEP
brosse métallique circulaire munie de pilote de guidage

Pull-action metal brush :

Same as above, but the centring guide is used as the drive spindle in places with difficult access.
Pull-action versions: BAMET
Pull-action metal brush

Metal brush for mounting :

Brushes without centring guides for mounting on stands.
Internal diam: 2.5, 4 and 5 mm.
Brushing diameter: from 6 mm to 60 mm
Guide diam: from 2 mm to 25.4 mm
Wire diam: brassed hard steel 0.25 mm stainless steel 0.20 mm 0.25 mm

Brushes without centring guides for mounting on stands
 
Home  |  Pilot Bonding Brushes  |  BAMEP diameter  |  BAMET diameter |  Applications  |  Contact & map  |  Map of the site